Design
Main designer since 14 ก.ย.: presented the design concept then, the revised device on 21 ก.ย., and led the Design 2 side of the 27 ก.ย. session (LN in the design files). On the sheet under Design 2, now the Design team.
29 ก.ย.: the feedback on the earlier drawing was about the gap, Tiger raised it too. What the gap does (volume against speed, standing blood against shear), what tilt in degrees, and a first value to simulate with. The drawn gap is 4.3 mm radial and 0.3 mm axial on /public/c5-sheet; the vanes are drawn at 90 degrees as spoken. Also collects the answers to the All Design question list for 15 ต.ค.
Back to the board